Control

Brakes: Controls held in each of the pilot’s hands connect to the trailing edge of the left and right sides of the wing. These controls are called ‘brakes’ and provide the primary and most general means of control in a paraglider. The brakes are used to adjust speed, to steer (in addition to weight-shift), and flare (during landing).

Weight Shift: In addition to manipulating the brakes, a paraglider pilot must also lean in order to steer properly. Such ‘weight-shifting’ can also be used for more limited steering when brake use is unavailable, such as when under ‘big ears’ (see below). More advanced control techniques may also involve weight-shifting.

Speed Bar: A kind of foot control called the ‘speed bar’ (also ‘accelerator’) attaches to the paragliding harness and connects to the leading edge of the paraglider wing, usually through a system of at least two pulleys (see animation in margin). This control is used to increase speed, and does so by decreasing the wing’s angle of attack. This control is necessary because the brakes can only slow the wing from what is called ‘trim speed’ (no brakes applied). The accelerator is needed to go faster than this.

Learning to fly

Most popular paragliding regions have a number of schools, generally registered with and/or organized by national associations. Certification systems vary widely between countries, though around 10 days instruction to basic certification is standard.

There are several key components to a paragliding pilot certification instruction program. Initial training for beginning pilots usually begins with some amount of ground school to discuss the basics, including elementary theories of flight as well as basic structure and operation of the paraglider.

Students then learn how to control the glider on the ground, practicing take-offs and controlling the wing ‘overhead’. Low, gentle hills are next where students get their first short flights, flying at very low altitudes, to get used to the handling of the wing over varied terrain. Special winches can be used to tow the glider to low altitude in areas that have no hills readily available.

As their skills progress, students move on to steeper/higher hills (or higher winch tows), making longer flights, and learning to turn the glider, control the glider’s speed, then moving on to 360° turns, spot landings, ‘big ears’ (used to increase the rate of descent for the paraglider), and other more advanced techniques. Training instructions are often provided to the student via radio, particularly during the first flights.

paragliding